DigiTech JamMan SOLO XT Owner's Manual download pdf (Page 59)

Formatting Memory Cards

If a memory card is inserted into the JamMan Solo XT that does not have a valid

format, the JamMan Solo XT will not recognize it and the display will read nF. The

card must be formatted before the JamMan Solo XT can use it.

It is recommended any memory card that is inserted into the JamMan Solo XT for

the ﬁrst time be formatted using the JamMan Solo XT’s format procedure.

WARNING! Formatting a memory card will erase all data on the card.

To format a Micro SD/SDHC card when “nF“ is displayed:

1. While the display reads nF, the

STORE button will begin ﬂashing

prompting for a format conﬁrmation.

2. Press the <STORE> button. The

display will read F? (Format ?) and the

STORE button will continue to ﬂash.

If you wish to abort this procedure,

press the <PEDAL SWITCH>. If you

wish to proceed, go to step 3.

3. To initiate the card formatting

procedure, press and hold the

<STORE> button for two seconds.

The display will show BuS indicating

the card is being formatted. Once

completed, the JamMan Solo XT will

return to normal operation.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 71 72

No comments

DigiTech JamMan SOLO XT Owner's Manual Page 59