DigiTech JamMan SOLO XT Owner's Manual download pdf (Page 23)

Recording a Loop (Auto Quantize)

Pedal Tempo Off (Default)/Auto Record Off (Default)

1. Select an empty memory location

using the <UP/DOWN> buttons

(LOOP and SINGLE LEDs will be off).

2. Set the <RHYTHM LEVEL> control

to the 9 o’clock position then tap

the <TEMPO> button a few times at

the rate you want the phrase tempo

to be. You will begin to hear the

Rhythm Guide Track. The beats will

be indicated by a ﬂashing TEMPO

button LED, ﬂashing red on the ﬁrst

downbeat and green on all remaining

beats of the measure. When using the

Rhythm Guide Track, time signature

can be manually set to a different time

signature other than the default of 4

beats per measure (see “Setup > Time

Signature

”).

3. Press the <PEDAL SWITCH> to

initiate recording and begin playing.

You will receive a one measure count

in, indicated by a ﬂashing red and

green STATUS LED. After the count

in, begin playing with the ﬁrst beat

to start recording. Recording will be

indicated by a solid red STATUS LED.

4. As soon as you’re done recording,

press the <PEDAL SWITCH> again

to stop recording and initiate playback.

Quickly press the <PEDAL SWITCH>

twice to stop loop playback.

5. Press the <STORE> button twice if

you wish to store the loop.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 71 72

No comments

DigiTech JamMan SOLO XT Owner's Manual Page 23