DigiTech RP350 User Manual download pdf (Page 8)

A Guided Tour of the RP350

Front Panel

AMP LEVELAMP GAIN

EXPRESSION

1. Up/Down Footswitches

These two Footswitches are used to select presets, access the Tuner, or bypass the RP350. The

Footswitch on the right will select the next preset up, and the Footswitch on the left will select

the next preset down. Pressing both Footswitches together will bypass the currently selected

preset. Pressing and holding both Footswitches will access the Tuner. Press either Footswitch

to exit Bypass or Tuner mode.

2. Knobs 1-6 (From left to right)

These six knobs perform various functions, depending on which mode is currently active and

what (if anything) is being edited. The functions are listed below:

Tone Library (Knob 1)

1. In Performance mode, this knob selects from a library of preset amp tones. (See page 31

for a list of preset amp tones.)

2. When editing a preset, this knob changes the Amp or Effect model for the selected row.

3. When editing an Effect row, press this knob to turn on or bypass the effect.

4. When the Drums row is selected, this knob selects the ﬁrst pattern of each style (Rock,

Blues, Jazz, etc.).

5. When the Expression row is selected, this knob selects the Expression Pedal, LFO 1, and

LFO 2 parameter links.

Effects Library (Knob 2)

1. In Performance mode, this knob selects from a library of preset effect chains. (See page

31 for a list of preset effect chains.)

2. When editing a preset, this knob modiﬁes the parameter listed in the column

directly above it for the selected Effect row.

3. When the Drums row is selected, this knob selects the different drum patterns available.

4. When the Expression row is selected, this knob selects which parameter is assigned to

the Expression Pedal, LFO1 or LFO2.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

No comments

DigiTech RP350 User Manual Page 8