DigiTech QUAD4 User Manual download pdf (Page 25)

DETUNERS / PITCH SHIFTERS

Detuners are similar to pitch shifters, but the intervals between the detuned signal and the original are much small-

er, usually expressed in cents (hundredths of a semitone). The Quad 4 uses percentages of semitones to express the

shifted note's distance from the original. For example, with a maximum detune setting of 50%, the pitch is exactly

one semitone (50 cents) up from the original.

Pitch shifters allow you to create multiple voices from a single note input. In the Quad 4, the new pitch is deter-

mined by the setting of the SHFT Parameters, which can cover a pitch range of four octaves.

PARAM. DESCRIPTION Detuners

✓✓

✓

Octal Detune

Quad Detune

Stereo Dual Detune

Dual Detune

FX: Lvl Controls the signal input level fed to the Module. Varies from OFF to 100%.

Dry: Lvl

Controls the level of the dry (uneffected) signal. Ranges from OFF to 100%.

Balance

Controls the left/right positioning of the dry signal in the stereo soundfield. Varies from -99 (all left) to

99 (all right).

Dly A - B

Controls the amount of time before detuner voices A and B are heard. Higher delay time settings

produce a short slapback delay effect. Ranges from 0 to 60 milliseconds.

✓✓

Dtn A - B

Controls the detuning amount for detuner voices A and B. Higher detune settings produce a more

dissonant sound. Ranges from -50% to 50%.

✓

Dtn C - D

Controls the detuning amount for detuner voices C and D. Ranges from -50% to 50%.

Dtn E - H

Controls the detuning amount for detuner voices E through H. Ranges from -50% to 50%.

Dly C - D

Controls the amount of time before detuner voices C and D are heard. Ranges from 0 to 60 milliseconds.

Dly E - H

Controls the amount of time before detuner voices E through H are heard.

Ranges from 0 to 60 milliseconds.

Out A - B

Adjusts the overall level of detuner voice A or B. Ranges from OFF to 100%.

Pan A - B

Controls the stereo soundfield placement of detuner voice A or B. Varies from -99 (all left) to 99 (all right).

Out LA - LB

Adjusts the left side level of detuner voice A or B. Ranges from OFF to 100%.

Out RA - RB

Adjusts the right side level of detuner voice A or B. Ranges from OFF to 100%.

Spread

Controls the width of the effect's stereo imaging. The higher the setting, the wider the image.

The lower the setting, the more monophonic the effect becomes. Ranges from 1 to 10.

Pan C - D

Controls the stereo soundfield placement of detuner voice C or D. Varies from -99 (all left) to 99 (all right).

Out C - D Adjusts the overall level of detuner voice C or D. Ranges from OFF to 100%.

✓✓

✓

✓✓

Section 3 - Effects and Parameters

Quad 4 User's Manual

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 42 43

Comments to this Manuals

No comments

DigiTech QUAD4 User Manual Page 25

Comments to this Manuals