DigiTech QUAD4 User Manual download pdf (Page 15)

COMPARING PROGRAMS

During the course of editing Programs, you may find that you want to compare the edited version of the Program to

the original, stored version. Fortunately, the Quad 4 provides you with this valuable A/B feature in the Compare

function. To compare an edited Program with the original Stored version, do the following:

1. After having altered a program, press the <Program> and <Edit> buttons together. The top line of the

display reads:

*COMPARING ORIGINAL PRG*

When this message is displayed, the stored Program is temporarily loaded and active.

2. To return to the edited version, press either the <Program> or <Edit> button depending on which mode

you would like to return to.

NOTE: If you have not altered a program and press the <Program> and <Edit> buttons together, the display

will read:

Prg has not been changed

STORING PROGRAMS

The Store procedure allows you to rename, relocate and save any modifications you have made to programs so that

they can be accessed easily later. The following procedure tells how to store a Program:

1. When you finish editing a Program, press the <Store> button once. The display shows the current Program

name (which may appear something like this):

Note- that a cursor appears under the first character of the program name.

2. Using the <Data> wheel, change the character to one you want in the selected position. When the correct

character is displayed in that position, press the <Next Page> button. The cursor moves one character to

the right.

3. Using the <Next Page> and <Prev Page> buttons and the <Data> wheel, continue editing all the charac-

ters in the name until it is displayed the way you want (up to 24 characters can be used). Use the <1> but-

ton to select capital and lower case letters, <2> to select numbers, <3> to delete a character and the <4>

button to insert a blank space.

4. When you have the name the way you want it, press the <Store> button again. The top line of the display

reads:

STORE TO:

, followed by the stored name of the current Program. This screen allows you to select

the location of the new Program.

NOTE: When the Program is stored, it is stored in the User bank of Programs because Factory Programs cannot

be overwritten.

5. Use the <Data> wheel to select the Program number where you want to store the new Program.

6. Press the <Store> button once again. The top line of the display briefly reads:

STORING PROGRAM TO

, after which you are taken to the Program you just stored.

The newly created Program is now loaded, and can now be recalled at any time.

USER PRG

SecSecSec

NAME:REV:Large Smooth Ha

IN 4

IN 3

IN 2

IN 1

FACTORY PRG

- CHANGED

LEVEL 4

LEVEL 3

LEVEL 2

LEVEL 1

OUT 4

OUT 3

OUT 2

OUT 1

FX EDIT PAGEFX EDIT PAGE

1 2 3 4

nbr deL InS

MODIFIERS

1234

S-DISC

™

PROCESSING

%kHz

Cap

Section 2 - Basic Function of the Studio Quad 4

Quad 4 User's Manual

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

Comments to this Manuals

No comments

DigiTech QUAD4 User Manual Page 15

Comments to this Manuals