DigiTech Vocalist Live FX Owner's Manual download pdf (Page 10)

Owner's Manual

NOTE: Whenever the Aux In jack is connected to an audio source, it will

be used for Live Adapt features instead of the internal microphone. See

"Live Adapt" on page 15

4. Signal LED

This LED lights when the mic input signal is detected. This LED will light

green when a signal is present, yellow when approaching the A/D limiting

point, and red when limiting occurs. Good practice is to set the microphone

Input Gain knob so the Signal LED lights green regularly, lights yellow

occasionally, but never lights red.

NOTE: The Signal LED may also light red if the outputs clip due to

the added gain from multiple enabled effects. If such a condition is

encountered, simply lower the Input Gain knob on the back panel until

the Signal LED no longer indicates clipping.

5. DATA Encoder

This encoder is used to navigate menus and edit certain parameters.

Pressing this encoder selects different pages within the Gold Channel and

System Edit menus.

6. Store Button

When pressed, this button initiates the preset store and copy functions.

When a preset is edited, this button will light, indicating a change has been

made to the currently loaded preset’s stored settings.

7. System Button

This button enters the System Edit menu, where you can edit Live FX global

system parameters for conguring the Live FX for your application.

8. Sound Check Button

This button enables and disables the Sound Check feature. Sound Check

allows you to record a vocal loop which can then be used for auditioning

and editing effect parameters.

9. Edit Knobs

These four knobs are used to edit the

various effect and system parameters. They

correspond to the available on-screen

parameters as shown in the illustration to

the right.

WARMTH COMP CORRECT AMBNCE

20 15 50 35

Gold Channel

TYPE

1/3 (Push)

Standard

Edit 1

Knob

Edit 2

Knob

Edit 3

Knob

Edit 4

Knob

10. A/B Footswitch

The Live FX allows you to store two parts per preset: “A” and “B”. Vocal

effects can be independently enabled or disabled in each part. The A/B

footswitch then allows you to toggle between these A/B parts. This feature

can be helpful for applying dynamic effects within a song without having to

navigate presets, such as enabling delays or distortion effects on certain

words or vocal phrases. This A/B footswitch can be programmed in the

System Edit menu for toggle, momentary, or automatic operation (see "A/B

Footswitch Conguration" on page 28).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 71 72

Comments to this Manuals

No comments

DigiTech Vocalist Live FX Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for Music Pedal DigiTech Vocalist Live FX